Schaeff HR28 Hydraulic Final Drive Motor

Pa:5.65 kN; Cap bolt, SAE grade:5; J max.:244.475 mm; N1:19.05 mm; Adapter sleeve assembly:SNW 15x2.3/8; H2:28.575 mm; P180°:30.2 kN; PG:1/8 NPT; P150°:25.4 kN; da:60.325 mm;

Basic Static Radial Load Rating Co:18000 N; Oil Speed Rating n2:6000 rpm; d:55.000 mm; Grease Speed Rating n1:5000 rpm; Fillet Radius ra:2.00 mm; D:120.0000 mm; Basic Dynamic Radial Load Rating C:50700 N; B:29.00 mm;

Bearing limiting speed:2000 r/min; Initial grease fill:2749.95 g; Mass pillow block:356 kg; Appropriate attachment bolt size G:1.5 in; Bearing:22244 CCK/W33; P150°:236 kN; J1:133.35 mm; A2:311.15 mm; H:473.075 mm; P180°:285 kN;

Fillet Radius ra:2.00 mm; D:215.0000 mm; Basic Static Radial Load Rating 15 B Bearing Co2:193000 N; Basic Dynamic Radial Load Rating 40 AA Pair C1:390000 N; Basic Dynamic Radial Load Rating 15 B Bearing C2:199000 N; Angle Third:40 º; Grease Speed Rating n1:2200 rpm; Fillet Radius rb:1.00 mm; Oi

Fillet Radius ra:0.30 mm; Basic Dynamic Radial Load Rating C:3120 N; Basic Static Radial Load Rating Co:1560 N; D:22.0000 mm; Oil Speed Rating n2:110000 rpm; B:6.00 mm; Grease Speed Rating n1:76000 rpm; Fillet Radius rb:0.10 mm; d:10.000 mm;

d:100.000 mm; D:180.0000 mm; Sealed Speed Rating n3:2400 rpm; Fillet Radius ra:2.00 mm; Basic Dynamic Radial Load Rating C:124000 N; B:34.00 mm; Basic Static Radial Load Rating Co:93000 N; Grease Speed Rating Open/Shielded n1:3400 rpm; Oil Speed Rating n2:4000 rpm; Oil Speed Rating Open/Shielded n2:

Grease Speed Rating n1:5600 rpm; Sealed Speed Rating n3:5600 rpm; Basic Dynamic Radial Load Rating C:49500 N; d:40.000 mm; B:30.20 mm; Accessories:Two Seals & Snap-Rin; Oil Speed Rating n2:7500 rpm; Fillet Radius ra:1.00 mm; Basic Static Radial Load Rating Co:49000 N; D:80.0000 mm;

Accessories:Two Seals; Basic Static Radial Load Rating Co:228000 N; d:105.000 mm; Grease Speed Rating Open/Shielded n1:2400 rpm; D:290.0000 mm; Basic Dynamic Radial Load Rating C:247000 N; Oil Speed Rating Open/Shielded n2:2900 rpm; B:65.00 mm; Sealed Speed Rating n3:1600 rpm; Fillet Radius ra:3.00

with cylindrical bore:560 min-1; d:360 mm; Pu:4250 kN; Dynamic (Cr):12 mm; Oil:571.310 kN; D:600 mm; B:192 mm; with tapered bore:700 min-1; Grease:7500 kN; rs (min):5 mm;

Basic dynamic load rating C:880 kN; Mass rod end:10 kg; l1 min.:132 mm; Specific dynamic load factor K:300 N/mm²; α:6 °; l2 max.:349 mm; C1 max.:43 mm; h:265 mm; r1 min.:1 mm; d2 max.:162 mm;

D:870 mm; d2 ≈:675 mm; G:Tr 630x6; B2 ≈:336 mm; B1:310 mm; Mass bearing + sleeve:600 kg; d1:570 mm; Basic static load rating C0:17000 kN; Calculation factor Y0:2.2; Da max.:847 mm;