Kobelco SK80CS-1E Aftermarket Hydraulic Final Drive Motor

B:21.4 mm; B1:30.9 mm; d:25 mm; Designation of bearing:ES205G2T20; C:14 kN; Weight:0.39 kg; J:76 mm; C0:7.88 kN; Designation of housing:PF205-; s1:24.2 mm;

L:135 mm; s1:24 mm; Designation of housing:FS307-; d:31.75 mm; B:48 mm; J:100 mm; Weight:2.37 kg; e:11 mm; C:33.5 kN; A2:40 mm;

Characteristic rolling element frequency, BSF:6.23 Hz; Dynamic load, C:472 kN; B:55 mm; da max:114.2 mm; rs min:2.1 mm; e:0.24; Y2:4.23; Characteristic inner ring frequency, BPFI:10.39 Hz; Brand:SNR; Min operating temperature, Tmin:-20 °C;

L:70 mm; C0:7.88 kN; e:19 mm; Designation of bearing:UC205-15G2T20; Z:42 mm; B:34 mm; S:14.3 mm; s1:17 mm; N:11,5mm; Recommended tightening torque for set screw:3.7 Nm;

N:8,7mm; T min.:-20 °C; S:7.5 mm; A:8.7 mm; C0:7.88 kN; T max.:200 °C; A2:19.5 mm; s1:13.5 mm; C:14 kN; L:71 mm;

A1:13 mm; S:15.9 mm; e:18 mm; Designation of housing:F206-; s1:19.05 mm; A2:40.2 mm; B:38.1 mm; T max.:200 °C; C:19.5 kN; C0:11.2 kN;

Fatigue limit load, Cu:0.19 kN; Characteristic outer ring frequency, BPF0:2.03 Hz; Radial clearance class:CM; Dynamic load, C:9.7 kN; Brand:NTN; Nlim (grease):20,000 rpm; Characteristic cage frequency, FTF:0.34 Hz; da min:17 mm; Min operating temperature, Tmin:-40 °C; Static load, C0:4.2 kN;

s1:30.5 mm; G:M6x1; Designation of housing:T204-; H2:51 mm; L:94 mm; d1:32.4 mm; L3:51 mm; L1:61 mm; N2:32 mm; C0:6.65 kN;

E:20 mm; J:80 mm; Designation of housing:PA207N-; Designation of closed end cover:SCC207; Weight:1.58 kg; s1:21.45 mm; Designation of bearing:UC207G2; C0:15.2 kN; A1:27 mm; Dz:80 mm;

L:163 mm; G:R1/8"; H1:19 mm; B:32 mm; Weight:1.47 kg; N:14mm; A1:27 mm; A:45 mm; d:35 mm; Designation of housing:PE207N-;

s1:27.8 mm; T max.:200 °C; A:64 mm; A1:22 mm; L1:106 mm; A5:33.4 mm; L2:19 mm; Dz:110 mm; Designation of housing:T211N-; Z:76.8 mm;

Flinger Type:None; Bearing Family:Setscrew Ball Bearin; Bearing Locking Device:Setscrew; Flinger Material:None; Bearing Insert Material:Steel; Housing Material:Cast Iron; Retainer Type:Std Retainer; Retainer Material:Nylon; Grease Type:Unirex N2; Ball Grade:Class 10;

G:M6x1; B1:56.3 mm; C:31.85 kN; Weight:2.17 kg; T max.:200 °C; J:148 mm; Designation of bearing:EX209G2T20; B:42.8 mm; C0:20.8 kN; Recommended tightening torque for set screw:11.5 Nm;

Weight:2.27 kg; Designation of closed end cover:SCCE209; Designation of bearing:ES209G2; A:54 mm; s1:33.4 mm; S:11 mm; Dz:95 mm; N1:24 mm; d1:62 mm; Recommended tightening torque for set screw:11.5 Nm;

Base to Center Hight Numeric:4.5000 in; Grease Type:Mobilgrease XHP222; Bearing Series:307 Series; Ship Weight:73.98 LB; Housing Type:4 Bolt Pillow Block; Expansion Type:Expansion; Bearing Locking Device:Setscrew; Housing Series:507 SERIES (507 - 60; Brand:Baldor-Dodge; UPC:782475918300;