Case 160432A1 Hydraulic Final Drive Motor

Size Standards:Metric System; d:95; Days to Ship:9 Days or more; Bearing Style:Rubber Sealed; Specifications/Environment:Standard; Size Standards:Metric System; Retainer Type:Punching; Number of Raceway Ring Rows:Single Row; Precision:Grade 0; Max. Allowed rpm(rpm):4500;

C - Dynamic Load (Basic):86600 lb; Shaft Size Type:Metric; Y2 - Geometry Factor:4.17; Dimension BC:9.5 in; Grease Lubrication - B/C/O Seal:950 rpm; Dimension E:6.72 in; Shaft Size  :90 mm; Housing Style:Four-Bolt Square Fla; UPC Code:0883450336987; Oil Lubrication - B/C/O Seal:1000 rpm;

Nref:5,300 rpm; Min operating temperature, Tmin:-40 °C; da min:98 mm; d:85 mm; ra max:2.5 mm; Max operating temperature, Tmax:120 °C; Brand:SNR; D1:158.4 mm; Characteristic rolling element frequency, BSF:4.16 Hz; Static load, C0:96.8 kN;

G:M6x1; Designation of housing:T207N-; Designation of bearing:US207-22G2; d:34.92 mm; Recommended tightening torque for set screw:8 Nm; L3:64 mm; N2:37 mm; L:129 mm; N:22mm; SW:3.97 mm;

Type:Bearings with Housin; Number of Bearings:Double; Shape:Flange Type; Bearing Retained:No; Type:Bearings with Housin; Shape:Flange Type; Seals:VV (Non-Contact Rubb; Width T(mm):30 ～ 50; Flange Shape:Compact Type; Bearing Retained:No;

da max:26 mm; Product Group:B04144; Radial clearance class:C3; E:41.5 mm; B:18 mm; Minimum Buy Quantity:N/A; Fatigue limit load, Cu:3.45 kN; Mass (without HJ ring):0.14 kg; d:20 mm; Nlim (grease):14,000 rpm;

B1:35.7 mm; G:R1/8"; H:42.9 mm; A:38 mm; Designation of open end cover:SCOE206-30; d1:44.1 mm; S:9 mm; A1:25 mm; Recommended tightening torque for set screw:11.5 Nm; H2:82 mm;

Weight:4.16 kg; C0:32.8 kN; Designation of housing:PAE212N-; d1:82 mm; H2:140 mm; H:69.9 mm; d:60 mm; E:20 mm; T min.:-20 °C; A:60 mm;

RoHS:6; Bearing Material:Steel; Seals:ZZ (Double Shield); Flange Shape:Square Type; Bearing Material:Steel; Bearing Used:Deep Groove Ball Bea; Number of Bearings:Single; Bearing Retained:Yes (with retaining; Bearing Used:Deep Groove Ball Bea; Housing Material:[Aluminum Alloy] 201;

B:49.2 mm; T max.:200 °C; C:29.6 kN; A5:30.2 mm; G:M6x1; Designation of bearing:UC208-24G2T20; C0:18.2 kN; Designation of housing:C208-; T min.:-20 °C; S:19 mm;

da max:16 mm; Static load, C0:2.39 kN; D:28 mm; rs min:0.3 mm; Mass:0.02 kg; Dynamic load, C:5.1 kN; Characteristic rolling element frequency, BSF:4.07 Hz; Radial clearance class:C3; Characteristic outer ring frequency, BPF0:3.07 Hz; ra max:0.3 mm;

H:53.9 mm; C:31.85 kN; A1:33 mm; N:M12; Designation of bearing:EX209-26G2L4; B1:56.3 mm; Recommended tightening torque for set screw:8 Nm; A:54 mm; T max.:100 °C; B:42.8 mm;

Characteristic inner ring frequency, BPFI:4.92 Hz; ra max:2 mm; Max operating temperature, Tmax:120 °C; D:150 mm; Characteristic rolling element frequency, BSF:4.1 Hz; da min:81 mm; Characteristic cage frequency, FTF:0.38 Hz; Min operating temperature, Tmin:-20 °C; d:70 mm; Dynamic load, C:104 kN;

Type:Bearings with Housin; Lateral Width L(mm):54; Bearing I.D. d(mm):20; Height Indication:Height Selection; Height H(mm):40 ～ 60; Number of Bearings:Single; Housing Material:1045 Carbon Steel; Bearing Retained:Yes (with retaining; Type:Bearings with Housin; Shape:L-Shaped;

Number of Raceway Ring Rows:Double Row; Basic Load Rating, Dynamic Rating(N):121000; Load Direction:Radial; D:90; Load Direction:Radial; Raceway Ring Shape:Self-aligning roller; Retainer Type:Punching; d:40; Inner/Outer Ring Material:Steel; Shaft Bore Config.:Cylindrical Bore;